Surface Roughness Prediction in End-Milling Process

Surface roughness prediction for the end-milling process, which is one of the major cutting processes, is a very important economical consideration in order to increase machine operation and decrease production cost in an automated manufacturing environment. In this study; prediction of surface roughness (Ra) for Brass (60/40) material based on cutting parameters: cutting speed, feed rate, and depth of cut; was studied. 

Adaptive neuro-fuzzy inference system (ANFIS) was used to predict the surface roughness in the end milling process. Surface roughness was used as dependant variable while cutting speed of range (750 - 1750rpm), feed rate of range (50 - 250mm/min) and depth of cut of range (0.3 - 0.7mm) were used as predictor variables. Normal and feed forces were used as predictor variables to verify the ANFIS model. Different membership functions were adopted during the training process of ANFIS.The effects of cutting parameters on the normal force, feed force and surface roughness were discussed. Experimental test data were used to examine the ANFIS model by defining the reliability and percentage error of the model. Experimental results demonstrate the effectiveness of the proposed model. While the predicted surface roughness was compared with measured data; the mean square error has been found equal to 8.5 % hence the achieved accuracy is equal to 91.5 %. Although this work focuses on prediction of surface roughness for endmilling operation, the concepts introduced are general; ie., prediction of surface roughness using ANFIS can be applied to many other cutting and machining processes.

 Download

If you need more information about my research work, visit my website.

www.kfs.edu.eg/ibrahemmaher.html
 

Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining

End milling is one of the most common metal removal operations encountered in industrial processes. Product quality is a critical issue as it plays a vital role in how products perform and is also a factor with great influence on manufacturing cost. Surface roughness usually serves as an indicator of product quality. During cutting, surface roughness measurement is impossible as the cutting tool is engaged with the workpiece, chip and cutting fluid. However, cutting force measurement is easier and could be used as an indirect parameter to predict surface roughness. In this research work, a correlation analysis was initially performed to determine the degree of association between cutting parameters (speed, feed rate, and depth of cut) and cutting force and surface roughness using adaptive neuro-fuzzy inference system (ANFIS) modeling. Furthermore, the cutting force values were employed to develop an ANFIS model for accurate surface roughness prediction in CNC end milling. This model provided good prediction accuracy (96.65 % average accuracy) of surface roughness, indicating that the ANFIS model can accurately predict surface roughness during cutting using the cutting force signal in the intelligent machining process to achieve the required product quality and productivity.

Download the full article

If you need more information about my research work, visit my website.
www.kfs.edu.eg/ibrahemmaher.html