Showing posts with label Taguchi. Show all posts
Showing posts with label Taguchi. Show all posts

Tuesday, September 1, 2015

Surface Roughness Prediction in End-Milling Process

Surface roughness prediction for the end-milling process, which is one of the major cutting processes, is a very important economical consideration in order to increase machine operation and decrease production cost in an automated manufacturing environment. In this study; prediction of surface roughness (Ra) for Brass (60/40) material based on cutting parameters: cutting speed, feed rate, and depth of cut; was studied. 
Adaptive neuro-fuzzy inference system (ANFIS) was used to predict the surface roughness in the end milling process. Surface roughness was used as dependant variable while cutting speed of range (750 - 1750rpm), feed rate of range (50 - 250mm/min) and depth of cut of range (0.3 - 0.7mm) were used as predictor variables. Normal and feed forces were used as predictor variables to verify the ANFIS model. Different membership functions were adopted during the training process of ANFIS.The effects of cutting parameters on the normal force, feed force and surface roughness were discussed. Experimental test data were used to examine the ANFIS model by defining the reliability and percentage error of the model. Experimental results demonstrate the effectiveness of the proposed model. While the predicted surface roughness was compared with measured data; the mean square error has been found equal to 8.5 % hence the achieved accuracy is equal to 91.5 %. Although this work focuses on prediction of surface roughness for endmilling operation, the concepts introduced are general; ie., prediction of surface roughness using ANFIS can be applied to many other cutting and machining processes.



 Download

If you need more information about my research work, visit my website.
www.kfs.edu.eg/ibrahemmaher.html
 

Monday, August 31, 2015

Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production

Wire-cut electric discharge machining is a nontraditional technique by which the required profile is acquired using sparks energy. Concerning Wire-cut electric discharge machining, high cutting rates and precision machining is necessary to improve productivity and achieve high quality of machined workpieces. In this research work, an experimental investigation was introduced to achieve higher productivity of the wire electrode associated with sustainable production in terms of product quality and less heat-affected zone. For this purpose, the effects of machining parameters including peak current, pulse on time and wire preloading were investigated using adaptive neuro-fuzzy inference system along with the Taguchi method. From this study, the optimal setting of machining parameters to achieve higher productivity and sustainability was identified. Moreover, Neuro-fuzzy modelling was successfully used to build an empirical model for the selection of machining parameters to achieve higher productivity at highest possible surface quality and minimum cost for sustainable production.

Download

If you need more information about my research work, visit my website.
www.kfs.edu.eg/ibrahemmaher.html