Showing posts with label cutting force. Show all posts
Showing posts with label cutting force. Show all posts

Sunday, August 30, 2015

Investigating the Machinability of Al–Si–Cu cast alloy containing bismuth and antimony using coated carbide insert

Surface roughness and cutting force are two key measures that describe machined surface integrity and power requirement evaluation, respectively. This investigation presents the effect of melt treatment with addition of bismuth and antimony on machinability when turning Al–11%Si–2%Cu alloy. The experiments are carried out under oblique dry cutting conditions using a PVD TIN-coated insert at three cutting speeds of 70, 130 and 250 m/min, feed rates of 0.05, 0.1, 0.15 mm/rev, and 0.05 mm constant depth of cut. It was found that the Bi-containing workpiece possess the best surface roughness value and lowest cutting force due to formation of pure Bi which plays an important role as a lubricant in turning process, while Sb-containing workpiece produced the highest cutting force and highest surface roughness value. Additionally, change of silicon morphology from flake-like to lamellar structure changed value of cutting force and surface roughness during turning.


Download

If you need more information about my research work, visit my website.
www.kfs.edu.eg/ibrahemmaher.html

Saturday, August 29, 2015

Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining

End milling is one of the most common metal removal operations encountered in industrial processes. Product quality is a critical issue as it plays a vital role in how products perform and is also a factor with great influence on manufacturing cost. Surface roughness usually serves as an indicator of product quality. During cutting, surface roughness measurement is impossible as the cutting tool is engaged with the workpiece, chip and cutting fluid. However, cutting force measurement is easier and could be used as an indirect parameter to predict surface roughness. In this research work, a correlation analysis was initially performed to determine the degree of association between cutting parameters (speed, feed rate, and depth of cut) and cutting force and surface roughness using adaptive neuro-fuzzy inference system (ANFIS) modeling. Furthermore, the cutting force values were employed to develop an ANFIS model for accurate surface roughness prediction in CNC end milling. This model provided good prediction accuracy (96.65 % average accuracy) of surface roughness, indicating that the ANFIS model can accurately predict surface roughness during cutting using the cutting force signal in the intelligent machining process to achieve the required product quality and productivity.

Download the full article

If you need more information about my research work, visit my website.
www.kfs.edu.eg/ibrahemmaher.html




Tuesday, August 18, 2015

System configuration of Intelligent CNC machining

Machining processes are fundamentally complex, nonlinear, multi variate, and often subjected to various unknown external disturbances. A machining process is usually performed by a skilled operator who uses decision-making capabilities based on the intuition and rules of thumb gained from experience. This process is not accurate enough and in many cases product faults occur. For this reason and to realize highly productive and flexible machining, a reliable, automated machining system with intelligent functions (intelligent machining) is needed.

 

I tried to solve this problem in the following paper. 
http://link.springer.com/article/10.1007/s00170-014-6379-1 

If you need more information about intelligent machines visit my webpage.

www.kfs.edu.eg/ibrahemmaher.html
Or scan me here